Insulation material class


Release time:

2023-07-20

Since insulating materials are one of the key factors in the technical and economic indicators of motors and electrical appliances, what are the factors that affect insulating materials.

Since insulating materials are one of the key factors in the technical and economic indicators of motors and electrical appliances, what are the factors that affect insulating materials.

It is reported that from 1900 to 1967, the motor mass of 1hp(0.75kW) was reduced from 40kg to 10kg, and has been reduced to 6kg/kW level. An important reason for this change is the use of an insulating material having high heat resistance. Reducing the kg/kW value can save a lot of metal materials and reduce the cost of the motor. For example, after a Class A (105 ℃) motor is insulated with Class H (180 ℃), the volume can be reduced by 30% ~ 50%, saving 20% of copper, 30% ~ 50% of silicon steel sheet and 25% of cast iron. Of course, the use of the same model of machine, with a higher temperature index of insulation materials, you can increase the power or extend the life of the motor.

From the above report, it can be seen that the insulation performance of insulating materials is closely related to temperature. The higher the temperature, the poorer the insulating performance of the insulating material. In order to ensure the insulation strength, each insulating material has an appropriate maximum allowable working temperature, below which it can be safely used for a long time, and will age rapidly beyond this temperature.

According to the degree of heat resistance, the insulation material is divided into Y, A, E, B, F, H, C and other levels, the corresponding temperature of each heat resistance level is as follows:

Y-class insulation temperature resistance 90 ℃, A- class insulation temperature resistance 105 ℃, E-class insulation temperature resistance 120 ℃, B- class insulation temperature resistance 130 ℃, F-class insulation temperature resistance 155 ℃, H-class insulation temperature resistance 180 ℃, C- class insulation temperature resistance above 200 ℃.