- 1032 alkyd impregnating varnish
- 1038 melamine alkyd impregnating varnish
- 1040 phenolic modified polyester impregnating varnish
- 1042 imine epoxy impregnating varnish
- 1053 silicone impregnating varnish
- 2432 alkyd glass lacquer cloth (with)
- 2310 nylon woven fabric (band)
- 2210 oily silk cloth (band)
- 2450 Silicone Glass Paint Cloth
- 2440 polyester glass lacquered cloth
- 6520 polyester film insulation paper soft composite
- 6630 polyester film polyester fiber non-woven fabric soft composite
- 641 polyaramid fiber paper polyester film composite foil (NMN)
- 651 polyaramid fiber paper polyimide film composite (NHN)
- Polyimide Film
- 3025 phenolic laminated cloth board
- 3240 epoxy glass cloth laminate
- 3721 Phenolic Laminated Cloth Rod
- Corrugated board for electricians
Electrical insulation material
Release time:
2023-07-20
Commonly used electrical insulating materials can be divided into inorganic insulating materials, organic insulating materials and mixed insulating materials according to their different chemical properties.
Commonly used electrical insulating materials can be divided into inorganic insulating materials, organic insulating materials and mixed insulating materials according to their different chemical properties. Commonly used inorganic insulating materials are: mica, asbestos, marble, porcelain, glass, sulfur, etc., mainly used for motor, electrical winding insulation, switch floor and insulator. Organic insulating materials are: shellac, resin, rubber, cotton yarn, paper, hemp, rayon, etc., mostly used to make insulating paint, winding wire coated insulation, etc. The hybrid insulating material is a variety of molded insulating materials made of the above two materials after processing, and is used as a base, shell, etc. of an electrical appliance.
Application of Electrical Insulation Materials
The function of the insulating material is to separate the charged parts of the electrical equipment with different potentials. Therefore, the insulating material should first have a high insulation resistance and withstand voltage strength, and can avoid leakage, breakdown and other accidents. Secondly, the heat resistance is better to avoid aging and deterioration due to long-term overheating; in addition, it should have good thermal conductivity, moisture resistance and lightning protection, high mechanical strength and convenient processing. According to the above requirements, the performance indicators of commonly used insulation materials include insulation strength, tensile strength, specific gravity, expansion coefficient, etc.
Insulation withstand voltage strength: the higher the voltage applied to both ends of the insulator, the greater the electric field force of the charge in the material, and the more prone to ionization collision, resulting in insulator breakdown. The lowest voltage at which an insulator breaks down is called the breakdown voltage of the insulator. When a 1mm thick insulating material breaks down, the number of kilovolts to be added is called the insulation withstand voltage strength of the insulating material, referred to as insulation strength. As the insulation materials have a certain insulation strength, all kinds of electrical equipment, all kinds of safety appliances (electrician's pliers, electric pen, insulating gloves, insulating rods, etc.), all kinds of electrical materials, manufacturers have stipulated a certain allowable voltage, called rated voltage. The voltage used shall not exceed its rated voltage value to avoid accidents.
Tensile strength: insulating material unit cross-sectional area can withstand tension, such as glass per square centimeter cross-sectional area can withstand 1400 Newton tension.
The insulation properties of insulating materials are closely related to temperature. The higher the temperature, the poorer the insulating performance of the insulating material. In order to ensure the insulation strength, each insulating material has an appropriate maximum allowable working temperature, below which it can be safely used for a long time, and will age rapidly beyond this temperature. According to the degree of heat resistance, the insulation materials are divided into Y, A, E, B, F, H, C and other levels. For example, the maximum allowable working temperature of A- class insulation materials is 105 ℃, and most of the insulation materials in distribution transformers and motors are A- class.
Related News
The main production of insulating paint, impregnated fiber, composite laminates, laminates and other series of insulating material products
Contact Us
Address: Sanli Community, Xiguan Office, Xuchang City
Contact: Manager Li
Contact Phone:+86-13608432762
Mailbox:734363206@qq.com
Copyright©Xuchang Zhufeng Electrical Material Co.,Ltd
IPV6 SEO Business License