- 1032 alkyd impregnating varnish
- 1038 melamine alkyd impregnating varnish
- 1040 phenolic modified polyester impregnating varnish
- 1042 imine epoxy impregnating varnish
- 1053 silicone impregnating varnish
- 2432 alkyd glass lacquer cloth (with)
- 2310 nylon woven fabric (band)
- 2210 oily silk cloth (band)
- 2450 Silicone Glass Paint Cloth
- 2440 polyester glass lacquered cloth
- 6520 polyester film insulation paper soft composite
- 6630 polyester film polyester fiber non-woven fabric soft composite
- 641 polyaramid fiber paper polyester film composite foil (NMN)
- 651 polyaramid fiber paper polyimide film composite (NHN)
- Polyimide Film
- 3025 phenolic laminated cloth board
- 3240 epoxy glass cloth laminate
- 3721 Phenolic Laminated Cloth Rod
- Corrugated board for electricians
The function and requirements of solvent insulating paint
Release time:
2023-07-20
Insulating paint is mainly used for insulation treatment of motor electrical coils to fill the gaps and pores of coils, trunking or other insulators, to insulate and bond the coil wires into an insulating whole, and to form a continuous insulating coating on its surface to improve the electrical and mechanical properties, thermal conductivity and environmental protection of the entire insulation structure.
Insulating paint is mainly used for insulation treatment of electrical and mechanical coils to fill the gaps and pores of coils, wire grooves or other insulators, to insulate and bond the coil wires into an insulated whole, and to form a continuous insulating coating on its surface to improve the electrical and mechanical properties, thermal conductivity and environmental protection of the entire insulation structure.
The basic requirements for insulating paint are:
(1) Low viscosity and high solid content to ensure good permeability and filling ability of voids. The volatilization of components such as solvents and the loss of immersed resin during the curing process all affect the filling effect.
2. Good storage stability. Especially for immersion paints, there must be viscosity stability that meets the requirements of use.
3. Appropriate curing characteristics. Good internal drying, fast curing, low curing temperature. In order to improve the insulation performance, shorten the immersion drying cycle, save energy, avoid thermal damage to other insulation materials caused by high baking temperature.
4. Good bonding force. High mechanical strength, film should have good toughness. Electrical machinery and electrical equipment in the process of operation or use, to withstand the role of mechanical stress caused by various reasons. Insulation mechanical properties are not good, it will cause the coil to loosen, resulting in damage to the insulation. Therefore, the mechanical strength and adhesion of the coil insulation paint, especially the motor insulation paint that requires high output, such as electric tools, are very important properties.
5. Good moisture resistance. Paint wax moisture absorption will cause a significant decline in electrical performance, so the insulating paint must have a small moisture permeability, high electrical characteristics after immersion.
6, good heat resistance. In order to reduce the volume, reduce the amount, improve the output and reliability, it is necessary to reduce the insulation thickness and improve the heat resistance of the paint. The heat resistance of the paint used for insulation treatment has a great influence on the service life of the motor and electrical appliances.
7. Good oil resistance and chemical resistance. For oil-immersed insulated electrical appliances, cold motors, chemical plants and other electrical appliances, the insulation must have good oil resistance, refrigerant resistance, resistance to special chemical steam and other properties, in short, the use of different electrical equipment environment is different, afraid of the content of the environmental atmosphere is not the same.
Related News
The main production of insulating paint, impregnated fiber, composite laminates, laminates and other series of insulating material products
Contact Us
Address: Sanli Community, Xiguan Office, Xuchang City
Contact: Manager Li
Contact Phone:+86-13608432762
Mailbox:734363206@qq.com
Copyright©Xuchang Zhufeng Electrical Material Co.,Ltd
IPV6 SEO Business License