- 1032 alkyd impregnating varnish
- 1038 melamine alkyd impregnating varnish
- 1040 phenolic modified polyester impregnating varnish
- 1042 imine epoxy impregnating varnish
- 1053 silicone impregnating varnish
- 2432 alkyd glass lacquer cloth (with)
- 2310 nylon woven fabric (band)
- 2210 oily silk cloth (band)
- 2450 Silicone Glass Paint Cloth
- 2440 polyester glass lacquered cloth
- 6520 polyester film insulation paper soft composite
- 6630 polyester film polyester fiber non-woven fabric soft composite
- 641 polyaramid fiber paper polyester film composite foil (NMN)
- 651 polyaramid fiber paper polyimide film composite (NHN)
- Polyimide Film
- 3025 phenolic laminated cloth board
- 3240 epoxy glass cloth laminate
- 3721 Phenolic Laminated Cloth Rod
- Corrugated board for electricians
1042 imine epoxy impregnating varnish
1042 imine epoxy impregnating varnish 1042 imine epoxy impregnating varnish is composed of epoxy resin, imine modified polyester resin, xylene, butanol, solvent oil and other solvents. 1042 paint class F insulation. It has excellent mechanical, dielectric and moisture resistance, fast curing at low temperature, good bonding strength and stable storage. Used for impregnating F-class motor and electrical coil, suitable for high-speed rotating motor rotor impregnated coil.
Classification:
Insulation impregnating varnish series
1042 imine epoxy impregnating varnish
Keywords:
1042 imine epoxy impregnating varnish
Details
1042 imine epoxy impregnating varnish
1042 imine epoxy impregnating varnish is composed of epoxy resin, imine modified polyester resin, xylene, butanol, solvent oil and other solvents.
1042 paint class F insulation. It has excellent mechanical, dielectric and moisture resistance, fast curing at low temperature, good bonding strength and stable storage. Used for impregnating F-class motor and electrical coil, suitable for high-speed rotating motor rotor impregnated coil.
Method of use:
1. Pre-drying: The workpiece is dried in a blast oven at 80~100 ℃ for 1~3 hours to remove moisture and preheat according to the size and structure.
2. Dipping: the workpiece is cooled to below 50~60 ℃ and immersed in the paint tank, and immersed for 5~30 minutes according to the size of the workpiece until no bubbles escape. The viscosity of the lacquer liquid can be adjusted to the process range with x-4 thinners.
3. Drop paint: drop paint for more than 30 minutes at room temperature until it dries dry.
4. Baking and curing; the workpiece is heated to 120~140 ℃ in the blast oven for 2~4 hours, and the volatile solvent vapor should be ensured to escape the oven in time during the heating process. Specific use should be based on the workpiece and equipment conditions and the requirements of the degree of curing of the paint, after the test to determine the appropriate curing conditions.
5. Precautions:
(1)1042 paint is compatible with most of the modified polyester drying insulating paint. If the paint in the original tank is other types of modified polyester paint, as long as the 1042 paint and the original paint of the paint tank dissolve each other without muddy or sedimentation, it is not necessary to update the paint tank and pour it directly for use. Generally speaking, the performance of the mixed paint is between the original paint and the 1042 paint.
(2) The insulating paint is flammable and explosive, and safety should be paid attention to when using it. The workpiece can enter the oven after dripping dry. The oven in the drying room shall have sufficient exhaust channels, the door shall not be locked, and no open flame heat source shall be used as much as possible.
Packaging and storage:
1042 paint is packed in 18kg or 200kg drums. The original package is stored in a dry and cool room or under a shelter, and the storage period is six months from the date of delivery.
1042 thinner sealed in tin drums, 15kg or 150kg per barrel.
Recommended Products
Recommended Products
Online consultation
Online Consultation
The main production of insulating paint, impregnated fiber, composite laminates, laminates and other series of insulating material products
Contact Us
Address: Sanli Community, Xiguan Office, Xuchang City
Contact: Manager Li
Contact Phone:+86-13608432762
Mailbox:734363206@qq.com
Copyright©Xuchang Zhufeng Electrical Material Co.,Ltd
IPV6 SEO Business License